Skip to main content

Concrete Worker

Position Details

  • Full Time
  • Hourly
  • Salaried Position

Candidate Requirements

  • Ability to Travel
  • High School Diploma/GED Equivalent

Job summary: Concrete workers set up forms for concrete footings, walls, slabs and site concrete: then they place and finish the concrete. They may at times apply color hardeners and release agents while installing stamped concrete.

Qualification

To perform this job successfully the individual must meet the minimum requirements. To be a journeyperson (fully skilled) at this position the individual must be able to perform each of the essential duties satisfactorily.

Minimum requirements

  • High School Diploma/GED Equivalent Required
  • Have a current and valid Driver’s license, and reliable transportation
  • 18 years or older.
  • Previous concrete experience helpful but not required.
  • Commercial Drivers license is a plus but not required.

Essential job functions

  • Skills necessary to be a journeyperson for this position include but are not limited to the following:
  • Able to identify types and sizes of lumber.
  • Able to nail and install screws quickly and safely.
  • Able to use hand tools to complete required tasks.
  • Able to safely operate power saws and cut material in a neat and efficient manner.
  • Quickly, correctly, and efficiently setup footing forms
  • Quickly, correctly, and efficiently setup wall forms
  • Quickly, correctly, and efficiently setup flatwork forms.
  • Able to quickly, safely and efficiently install various materials and items in concrete forming.
  • Able to grade materials to within a 1” tolerance.
  • Able to tie rebar vertically and horizontally quickly and safely.
  • Able to layout and properly install anchor bolts and vertical reinforcing.
  • Knows how to use a finish trowel and is able to finish concrete properly and to sufficient quality.
  • Knows how to use a magnesium trowel properly.
  • Knows how to use a darby trowel properly.
  • Know how to use a bull float properly.
  • Be able to use trowels and floats to obtain level, flat and properly finished smooth and broomed concrete.
  • Know how to use an edging trowel or concrete groover.
  • Knows what to do, and can effectively implement the correct actions, if concrete begins to set to quickly.
  • Operate a skid loader safely and efficiently.
  • Operate skid loader to grade within 1″ tolerance
  • Operate a rough terrain forklift safely and efficiently.
  • Setup and run walk behind power trowels correctly with minimum errors
  • Setup and run riding power trowels correctly with minimum errors
  • Setup and run a power screed correctly with minimum errors
  • Setup and run a power vibra strike screed correctly with minimum errors
  • Setup and run a power rake correctly with minimum errors
  • Setup and run a Copperhead laser screed correctly with minimum errors
  • Identify visually the approximate slump of concrete.
  • Determine correct concrete mix to use for the situation, weather and site conditions.
  • Understand the admixtures available and know when and how to use them.
  • Determine the correct amount of concrete, or fill, needed.
  • Understand the types of concrete additives and their effect on concrete.
  • Understand why concrete is air entrained and when it should be done and should not be done.
  • Properly apply hardeners, sealers, curing agents and other surface applied chemicals.
  • Mark and cut concrete quickly & neatly.
  • Cut and bend rebar quickly, safely and correctly.
  • Able to read and understand blueprints
  • Able to properly set batter boards
  • Able to layout a foundation, building and/or site concrete
  • Able to set up and use site and laser transits to set heights correctly.
  • Able to efficiently supervise at least two other employees while completing an assignment.

Mathmatical Skills

  • Ability to easily add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals. Ability to convert fractions to decimal numbers and convert decimals to fractions.
  • Ability to understand and carry out instructions furnished in written, oral or diagram form.
  • Ability to deal with problems involving many variables in calm and reasonable manner.

Language Skills

  • Ability to read and comprehend simple instructions, short correspondence and memos.
  • Ability to understand the English language when spoken.
  • Ability to effectively present or convey information in one-on-one or small group situations.
  • Ability to write routine reports and simple correspondence

Physical abilities required

  • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
  • Specific vision abilities that are required by this job include peripheral vision, depth perception and ability to adjust focus

While performing the duties of this job, the employee is required to:

Constantly (677-100% of the time)

  • Stand
  • Walk
  • Repetitively use hands for gripping, pinching, pulling, pushing and fine manipulation
  • Reach with hands and arms forward or overhead
  • Bend at waist or neck
  • Climb and/or balance.
  • Lift and/or move more than 50 pounds

Frequently (34-66% of the time)

  • Sit
  • Stoop
  • Kneel
  • Crouch
  • Crawl.
  • Lift and/or more up to 100 pounds

Occasionally (1-33% of the time)

  • Lift and/or more over 100 pounds

Personal Behavior

  • Must present a professional image at all times.
  • Must conduct themselves in a profession work manner at all times.
  • Self motivated and able to work with minimal guidance.
  • Safety conscious and supports and complies with the company safety policy.
  • Maintains a positive attitude.
  • Able to get along with other workers and work well as a team.
  • Takes care of company tools and equipment.

Work Environment

  • Regularly exposed to moving mechanical parts and equipment.
  • Placed in precarious situations that have inherent risks associated with them.
  • Required to work at heights.
  • Constantly exposed to weather conditions including but not limited to rain, wind, snow and ice.
  • Frequently exposed to electricity and risk of electrical shock and vibration.
  • Frequently exposed to vapors, fumes or airborne particles.
  • Occasionally exposed to moderate levels of noise. Frequently exposed to high levels of noise.

Required Tools

All Concrete Workers

  • Tool Belt with pouches Speed Square Utility Knife
  • Chalk Line Tape Measure (25’ minimum) Claw Hammer
  • Pencils (as needed) Magnesium Float Rubber Boots
  • Rain Gear Leather work boots (Steel Toe Recommended)
  • Rebar Wire Tie Tool Knee Pads (per individual need)
  • 6’ Level minimum for Lead persons or Foreman

Concrete Finishers must also have

  • Groover
  • Finish Trowel
  • Edger